sm-g925a - fix drk / dm-verity verification failed problem solving
FLASH INSTRUCTIONS:
1. Choose correct flash file(s).
2. If you have PIT file chosen, then you must check 'Repartition' option.
3. Check flashing options if needed (Repartition, EFS clear, Boot update).
4. Power on the phone in download mode (turn off phone, press vol.down + home + power).
5. Connect the phone to PC with USB cable, install drivers if needed.
6. Press 'Flash' button.
Operation: Flash
Selected model: SM-G925A
Software version: 29.2
File analysis... OK
Total file size: 0xE0BAC310 (3595 Mb)
Searching USB Flash interface... COM10 detected
Setup connection... OK
Reading PIT from phone... OK
Sending boot.img... OK
Sending recovery.img... OK
Sending system.img... OK
Flashing done (time - 00:04:29)
Done with Samsung Tool PRO v.29.2
FLASH INSTRUCTIONS:
1. Choose correct flash file(s).
2. If you have PIT file chosen, then you must check 'Repartition' option.
3. Check flashing options if needed (Repartition, EFS clear, Boot update).
4. Power on the phone in download mode (turn off phone, press vol.down + home + power).
5. Connect the phone to PC with USB cable, install drivers if needed.
6. Press 'Flash' button.
Operation: Flash
Selected model: SM-G925A
Software version: 29.2
File analysis... OK
Total file size: 0xE0BAC310 (3595 Mb)
Searching USB Flash interface... COM10 detected
Setup connection... OK
Reading PIT from phone... OK
Sending boot.img... OK
Sending recovery.img... OK
Sending system.img... OK
Flashing done (time - 00:04:29)
Done with Samsung Tool PRO v.29.2
