kinggsm
Well-Known Member
nokia 208 rm-948 flash file 100% tested
rm948__10.24.mcusw
rm948__10.24.ppm_m1
rm948__10.24.image_m1_059S5N3
RM948_059S5N3_10.24_019.vpl
Download
Code:
Dead Mode is Selected
Waiting for USB device...
1. Phone should be Off!
2. Battery must be charged and inserted! ( if not used external power )
- > If phone can't switch to BL - use battery or flash from Local mode!
--- Insert USB cable now! ---
Wait for phone...
Device boot not done
Check Drivers
Try again
Connect phone on selected interface...
Phone found!
Series 40 Device detected!
read info... - Ok
Phone disconected!
Connect phone on selected interface...
Phone found!
Series 40 Device detected!
read info... - Ok
SSChannel : Create SC
SSChannel : SC Created!
ProductID HWCode : RM-948
Selected Variant : RM-948 MEA_M1_BLACK_LATIN_AO
Firmware Version : 10.24
Platform Version : Series 40
SSChannel : DC Ok with code 0x04
Switch to IDM now ...
IDM initializing, wait...
Checking access to Products folder...
Folder for RM-948 not exist. Attempt to create
Prepare done, collect info
[Query] : rm948__10.24.image_m1_059S5N3 , 32.72 MiB
[Query] : rm948__10.24.mcusw , 30.02 MiB
[Query] : rm948__10.24.ppm_m1 , 6.27 MiB
[Query] : RM948_059S5N3_10.24_019.vpl , 3.10 KiB
Files to download : 4
Total size to download : 69.01 MiB
Downloading now, please, wait...
[Download] : rm948__10.24.image_m1_059S5N3
[Download] : rm948__10.24.mcusw
[Download] : rm948__10.24.ppm_m1
[Download] : RM948_059S5N3_10.24_019.vpl
Verify files now ...
[Verify Ok] : rm948__10.24.mcusw
[Verify Ok] : rm948__10.24.ppm_m1
[Verify Ok] : rm948__10.24.image_m1_059S5N3
All done, all files were downloaded!
Phone disconected!
Connect phone on selected interface...
Core : v2.29 , BB5XG FlashEngine : v10.5
Selected FlashSettings : Manual
Check FlashFiles, Please, wait...
Files Set for Flashing :
MCU : rm948__10.24.mcusw
PPM : rm948__10.24.ppm_m1
CNT : rm948__10.24.image_m1_059S5N3
Flashing phone now...
[Gen] Rules accepted for : XGOLD Generation
Check files done...
-> SWversion check skipped : Dead mode selected
Dead Mode is Selected
Waiting for USB device...
-> If Windows say "Unrecognized device" / Operation not start
-> Or if Phone start charge - just reinsert battery
-> If flashing freeze - reinsert cable/battery and try again
--- Press phone's power button or insert usb cable! ---
Connection opened successfully
IF Boot Init : 0xF0
IF Resp Len : 0x16
IF xCPUID : XGOLD 618 [XMM6180 QUARK]
IF uCHIPID : 50A9070100030101E0201C0900242820498AE0B4FFFF
IF Resp Data : 50A9070100030101
Wait for user action : Insert battery
Sending EBL Loader ...
EBL Loader Ok
EBL Loader ready
Sending EBL ...
EBL sent Ok
EBL : QUARK_1340.100_M1S1
QUARK EEP config Ok
FLASHID : EC004000 , [ MuxOneNAND ]
Boot conf set, Target Ready
Boot done!
Backup enabled, will read all certificates
Reading CCC
Reading HWC
Reading NPC
IMEI : 359191051180267
Phone Product Code : 059V9G0
NPC Certificate saved...
CCC Certificate saved...
HWC Certificate saved...
RPL saved : C:\InfinityBox\BEST\Backup\Cert\359191051180267_XG618_CRT.rpl
===Flashing [MCU]===
Processing file : rm948__10.24.mcusw
Region count : 8
00 : [ PSI ] : psi_flash_unsigned.fls
01 : [ BCore ] : slb_signed.fls
02 : [ Code ] : main_toc_signed.fls
03 : [ Code ] : rm948__10.24.mcusw_signed_mcusw.fls
04 : [ Code ] : swap_signed.fls
05 : [ Cust ] : dynsw.fls
06 : [ Code ] : aeneas_signed.fls
07 : [ Code ] : fota_signed.fls
Parse done , flashing now
Flash : 00 : psi_flash_unsigned.fls
Sending Sec-Pack
SecInfo Area : 0x0000 , SecInfo Len : 0x0800
Erase area 0x00 , Start 0x00090000 , Len : 0x00020000
Erase now...
Erase done
Region Start : 0x00090000 , Data Len : 0x00010FB0
Region Load done
Write done
psi_flash_unsigned.fls image flash done
Flash : 01 : slb_signed.fls
Sending Sec-Pack
SecInfo Area : 0x0001 , SecInfo Len : 0x0800
Erase area 0x00 , Start 0x60000000 , Len : 0x00040000
Erase now...
Erase done
Region Start : 0x60000000 , Data Len : 0x00040000
Region Load done
Write done
slb_signed.fls image flash done
Flash : 02 : main_toc_signed.fls
Sending Sec-Pack
SecInfo Area : 0x0002 , SecInfo Len : 0x0800
Erase area 0x00 , Start 0x60040000 , Len : 0x00000400
Erase now...
Erase done
Region Start : 0x60040000 , Data Len : 0x00000400
Region Load done
Write done
main_toc_signed.fls image flash done
Flash : 03 : rm948__10.24.mcusw_signed_mcusw.fls
Sending Sec-Pack
SecInfo Area : 0x0003 , SecInfo Len : 0x0800
Erase area 0x00 , Start 0x62E00000 , Len : 0x01100000
Erase now...
Erase done
Erase area 0x01 , Start 0xFFF00000 , Len : 0x00080000
Erase now...
Erase done
Region Start : 0x62E00000 , Data Len : 0x00F5AFCC
Region Load done
Write done
rm948__10.24.mcusw_signed_mcusw.fls image flash done
Flash : 04 : swap_signed.fls
Sending Sec-Pack
SecInfo Area : 0x0004 , SecInfo Len : 0x0800
Erase area 0x00 , Start 0x80000000 , Len : 0x00F00000
Erase now...
Erase done
Region Start : 0x80000000 , Data Len : 0x00C278E0
Region Load done
Write done
swap_signed.fls image flash done
Flash : 05 : dynsw.fls
Sending Sec-Pack
SecInfo Area : 0x0005 , SecInfo Len : 0x0800
Erase area 0x00 , Start 0x62080000 , Len : 0x00100000
Erase now...
Erase done
Region Start : 0x62080000 , Data Len : 0x00044000
Region Load done
Write done
dynsw.fls image flash done
Flash : 06 : aeneas_signed.fls
Sending Sec-Pack
SecInfo Area : 0x0006 , SecInfo Len : 0x0800
Erase area 0x00 , Start 0x63F79C00 , Len : 0x00080000
Erase now...
Erase done
Region Start : 0x63F79C00 , Data Len : 0x00046870
Region Load done
Write done
aeneas_signed.fls image flash done
Flash : 07 : fota_signed.fls
Sending Sec-Pack
SecInfo Area : 0x0007 , SecInfo Len : 0x0800
Erase area 0x00 , Start 0x61F00004 , Len : 0x0017FFFC
Erase now...
Erase done
Region Start : 0x61F00004 , Data Len : 0x00149A78
Region Load done
Write done
fota_signed.fls image flash done
===Flashing [PPM]===
Processing file : rm948__10.24.ppm_m1
Region count : 1
00 : [ Cust ] : package_m1.ppm_ebl_psi.fls
Parse done , flashing now
Flash : 00 : package_m1.ppm_ebl_psi.fls
Sending Sec-Pack
SecInfo Area : 0x0000 , SecInfo Len : 0x0800
Erase area 0x00 , Start 0x80F00000 , Len : 0x00B00000
Erase now...
Erase done
Region Start : 0x80F00000 , Data Len : 0x005ECECC
Region Load done
Write done
package_m1.ppm_ebl_psi.fls image flash done
===Flashing [CNT]===
Processing file : rm948__10.24.image_m1_059S5N3
Region count : 1
00 : [ Cust ] : package_m1_059S5N3.image.fls
Parse done , flashing now
Flash : 00 : package_m1_059S5N3.image.fls
Sending Sec-Pack
SecInfo Area : 0x0000 , SecInfo Len : 0x0800
Erase area 0x00 , Start 0xA1000000 , Len : 0x0C580000
Erase now...
Erase done
Erase area 0x01 , Start 0xAE000000 , Len : 0x00300000
Erase now...
Erase done
Region Start : 0xA1000000 , Data Len : 0x02060400
Region Load done
Write done
package_m1_059S5N3.image.fls image flash done
Flashing done!
Total flash time : 00:00:16
Reboot phone now...
Reading Phone Info....
Connected phone - Nokia 208
Software Info: V 10.24 07-01-14 RM-948 (c) Nokia
IMEI: 359191051180267
PPM version : V 10.24 07-01-14 RM-948 (c) Nokia M1
Product code: 059V9G0
Wait, when phone will be ready ...
Checking...
SimLock status : SimLock is Ok
Security status : Security is Ok
Read Info Done!
Processing After Flash Defaults...
FullFactorySet... Ok!
UserDataDefaultsSet...OK!
ServiceDefaultsSet... Ok!
LeaveDefaultsSet... Ok!
ProductTuneSet...OK!
SwUpgradeSet...OK!
Check and Upload User Certificates ...
Total - 58 certs
Certificates found, skip upload ...
Battery voltage is enough for start
AfterFlash operations done ;D
Done!
Connect phone on selected interface...
Elapsed: 00:00:47
Connect phone on selected interface...
Phone found!
Series 40 Device detected!
read info... - Ok
Read and Check phone data...
----------------------
RAP_BOOT: 0000000000000000
RAP_PUB: 0000000000000000000000000000000000000000
CMT_ROOT: 00000000000000000000000000000000
RAP_PAPUB: 0000000000000000000000000000000000000000
----------------------
Live Test Ok!
----------------------
CNT sector : 128 kb
------------------------
CMLA Key status : CMLA key is Ok
SimLock status : SimLock is Ok
Security status : Security is Ok
-----------------------
PA_SimLock Version :
PA_SL30 (20 digit) phone detected...
Phone disconected!
Connect phone on selected interface...rm948__10.24.mcusw
rm948__10.24.ppm_m1
rm948__10.24.image_m1_059S5N3
RM948_059S5N3_10.24_019.vpl
Download