Samsung j110h boot repair

mobile zone

mobile zone

Super VIP Member
Staff member
VIP Member
Joined
Feb 11, 2017
Messages
1,204
Reaction score
322
Points
84
Age
38
Location
Philippines
Samsung j110h boot repair done

EMMC Device Information :
EMMC CID: 90014A4834473262110142789CB22303
EMMC CSD: D07F01320F5903FFFFFFFFEF8A4040DB
EMMC Manufacture : SKHYNIX , EMMC NAME: H4G2b , HEX: 483447326200 , S/N: 42789CB2 , rev. 0x01
EMMC Manufacture ID: 0x90 , OEM ID: 0x4A , Device Type: BGA (Discrete embedded) , Date: 2/2016
EMMC ROM 1 (Main User Data) Capacity: 3728 MB (0000E9000000)
EMMC ROM 2/3 (Boot Partition 1/2) Capacity: 4096 KB (000000400000)
EMMC RPMB (Replay Protected Memory Block) Capacity: 4096 KB (000000400000) Counter: 0 , Response: Clean
EMMC Permanent Write Protection: No
EMMC Temporary Write Protection: No
Extended CSD Information :
Extended CSD rev: 1.6 (MMC 4.5, MMC 4.51)
Boot configuration [PARTITION_CONFIG]: 0x08 , Boot from: ROM2 (Boot partition 1)
Boot Bus Config: 0x00 , width 1bit
H/W Reset Function [RST_N_FUNCTION]: 0x00, RST_n signal is temporarily disabled
Supported partition features [PARTITIONING_SUPPORT]: 0x07
Device supports partitioning features
Device can have enhanced technological features in partitions and user data area
Device can have extended partitions attribute
Partition Settings [PARTITION_SETTING_COMPLETED]: 0x01
Backup saved: H4G2b_42789CB2_20210624_190130.extcsd
EMMC Init completed.

Setting interface to EasyJtag2/ISP
Setting bus width to 1 Bit
Setting frequence to 24 MHz
CMD Pullup Level: 2167 mV
CMD Active Level: 2332 mV
EMMC Device Information :
EMMC CID: 90014A4834473262110142789CB22303
EMMC CSD: D07F01320F5903FFFFFFFFEF8A4040DB
EMMC Manufacture : SKHYNIX , EMMC NAME: H4G2b , HEX: 483447326200 , S/N: 42789CB2 , rev. 0x01
EMMC Manufacture ID: 0x90 , OEM ID: 0x4A , Device Type: BGA (Discrete embedded) , Date: 2/2016
EMMC ROM 1 (Main User Data) Capacity: 3728 MB (0000E9000000)
EMMC ROM 2/3 (Boot Partition 1/2) Capacity: 4096 KB (000000400000)
EMMC RPMB (Replay Protected Memory Block) Capacity: 4096 KB (000000400000) Counter: 0 , Response: Clean
EMMC Permanent Write Protection: No
EMMC Temporary Write Protection: No
Extended CSD Information :
Extended CSD rev: 1.6 (MMC 4.5, MMC 4.51)
Boot configuration [PARTITION_CONFIG]: 0x08 , Boot from: ROM2 (Boot partition 1)
Boot Bus Config: 0x00 , width 1bit
H/W Reset Function [RST_N_FUNCTION]: 0x00, RST_n signal is temporarily disabled
Supported partition features [PARTITIONING_SUPPORT]: 0x07
Device supports partitioning features
Device can have enhanced technological features in partitions and user data area
Device can have extended partitions attribute
Partition Settings [PARTITION_SETTING_COMPLETED]: 0x01
Backup saved: H4G2b_42789CB2_20210624_190140.extcsd
EMMC Init completed.

Operation: Writing all eMMC Regions...

Operation: Writing BootConfig ...
Reg: 179 Value: 0x08
Reg: 177 Value: 0x00
Reg: 162 Value: 0x00
Done

Writing to: ROM2 , start: 0x000000000000 , size: 0x000000400000
Filename: Samsung_SM-J110H_emmc_dump_ROM2.BIN
eMMC switching to ROM2
Writing partition...
Done writing partition. Write speed: 708.24 KB/s

Writing to: ROM3 , start: 0x000000000000 , size: 0x000000400000
Filename: Samsung_SM-J110H_emmc_dump_ROM3.BIN
eMMC switching to ROM3
Writing partition...
Done writing partition. Write speed: 719.71 KB/s

Writing to: ROM1 , start: 0x000000000000 , size: 0x000013600000
Filename: Samsung_SM-J110H_emmc_dump_ROM1.bin
eMMC switching to ROM1
Writing partition...
Done writing partition. Write speed: 2299.58 KB/s

All done time: [00:02:32:799]
 
Back
Top