Md Firoz Ahmed™
Super VIP Member
samsung sm- g530f flashing Sending aboot.mbn... error problem solution
Sending aboot.mbn... error timeout problem
try 6 file same problem
G530FXXS1APL1_G530FOJV1API1_KSA
G530FXXU1ANJ7_G530FOLB1ANJ7
G530FXXU1ANK2_G530FOJV1ANK2
G530FXXU1AOE2_G530FQOJT1AOF1
G530FXXU1AOE2_G530FQOJT1AOF1_G530FXXU1AOE2_HOME.tar
G530FZXXU1ANL7_OXX1ANL4_v4.4.4_Repair_Firmware
try z3x box and odin same problem
solution 1 just chang phone model and firmware
FLASH INSTRUCTIONS:
1. Choose correct flash file(s).
2. If you have PIT file chosen, then you must check 'Repartition' option.
3. Check flashing options if needed (Repartition, EFS clear, Boot update).
4. Power on phone in download mode (turn off phone, press vol.down + home + power).
5. Connect phone to PC with USB cable, install drivers if needed.
6. Press 'Flash' button.
Operation: Flash
Selected model: SM-G530F
Software version: 27.7
File analysis... Ok
Total file size: 0x45014898 (1104 Mb)
Searching USB Flash interface... COM21 detected
Setup connection... Ok
Reading PIT from phone... Ok
Sending aboot.mbn... Ok
Sending sbl1.mbn... Ok
Sending rpm.mbn... Ok
Sending tz.mbn... Ok
Sending hyp.mbn... Ok
Sending NON-HLOS.bin... Ok
Sending sec.dat... Ok
Sending boot.img... Ok
Sending recovery.img... Ok
Sending system.img.ext4... Ok
Sending modem.bin... Ok
Sending cache.img.ext4... Ok
Sending hidden.img.ext4... Ok
Flashing done (time - 00:02:03)
Done with Samsung Tool PRO v.27.7
download 1 file firmware version G530HDXU2AOC2_OLB2AOC1_Southeast_Asia_4.4.4
G530HDXU2AOC2_G530HOLB2AOC1_G530HXXU2AOA1_HOME.tar.md5
100% tested by Md Firoz Ahmed
Download
Sending aboot.mbn... error timeout problem
try 6 file same problem
G530FXXS1APL1_G530FOJV1API1_KSA
G530FXXU1ANJ7_G530FOLB1ANJ7
G530FXXU1ANK2_G530FOJV1ANK2
G530FXXU1AOE2_G530FQOJT1AOF1
G530FXXU1AOE2_G530FQOJT1AOF1_G530FXXU1AOE2_HOME.tar
G530FZXXU1ANL7_OXX1ANL4_v4.4.4_Repair_Firmware
try z3x box and odin same problem
solution 1 just chang phone model and firmware
FLASH INSTRUCTIONS:
1. Choose correct flash file(s).
2. If you have PIT file chosen, then you must check 'Repartition' option.
3. Check flashing options if needed (Repartition, EFS clear, Boot update).
4. Power on phone in download mode (turn off phone, press vol.down + home + power).
5. Connect phone to PC with USB cable, install drivers if needed.
6. Press 'Flash' button.
Operation: Flash
Selected model: SM-G530F
Software version: 27.7
File analysis... Ok
Total file size: 0x45014898 (1104 Mb)
Searching USB Flash interface... COM21 detected
Setup connection... Ok
Reading PIT from phone... Ok
Sending aboot.mbn... Ok
Sending sbl1.mbn... Ok
Sending rpm.mbn... Ok
Sending tz.mbn... Ok
Sending hyp.mbn... Ok
Sending NON-HLOS.bin... Ok
Sending sec.dat... Ok
Sending boot.img... Ok
Sending recovery.img... Ok
Sending system.img.ext4... Ok
Sending modem.bin... Ok
Sending cache.img.ext4... Ok
Sending hidden.img.ext4... Ok
Flashing done (time - 00:02:03)
Done with Samsung Tool PRO v.27.7
download 1 file firmware version G530HDXU2AOC2_OLB2AOC1_Southeast_Asia_4.4.4
G530HDXU2AOC2_G530HOLB2AOC1_G530HXXU2AOA1_HOME.tar.md5
100% tested by Md Firoz Ahmed
Download
Last edited: