symphony e58 baseband unknown imei null problem done by cm2
Code:
1. Remove battery. Insert battery back
2. Press and hold 'VolumeUp' and 'VolumeDown' keys
-> Alternative : just ONE 'VolumeUp' or 'VolumeDown' key
3. Insert cable
==== Wait for phone...
Phone found! [ 12 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
FDL Ready!
Boot Ver : SC7715 Loader NAND v1.1 Infinity
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!
FlashMode Set : Ok!
Unknown structure detected! Something went wrong :(
If phone work normally - send report to support!
Elapsed: 00:00:45
Reconnect Power/Cable!
NVM File looks Ok
Operation : Write NV [ v1.27 ]
1. Remove battery. Insert battery back
2. Press and hold 'VolumeUp' and 'VolumeDown' keys
-> Alternative : just ONE 'VolumeUp' or 'VolumeDown' key
3. Insert cable
==== Wait for phone...
Phone found! [ 12 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
FDL Ready!
Boot Ver : SC7715 Loader NAND v1.1 Infinity
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!
FlashMode Set : Ok!
Unknown structure detected! Something went wrong :(
If phone work normally - send report to support!
Elapsed: 00:00:43
Reconnect Power/Cable!
NVM File looks Ok
Operation : Write NV [ v1.27 ]
1. Remove battery. Insert battery back
2. Press and hold 'VolumeUp' and 'VolumeDown' keys
-> Alternative : just ONE 'VolumeUp' or 'VolumeDown' key
3. Insert cable
==== Wait for phone...
Phone found! [ 12 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
FDL Ready!
Boot Ver : SC7715 Loader NAND v1.1 Infinity
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!
FlashMode Set : Ok!
Unknown structure detected! Something went wrong :(
If phone work normally - send report to support!
Elapsed: 00:00:43
Reconnect Power/Cable!
Loading : E58_HW2_V9 4.4.2 SPD LETEST VERSION PAC .pac
CRVersion : BP_R1.0.0
PacCPUinfo : SC77xx
PacVersion : E58_HW2_V9 4.4.2 SPD LETEST VERSION PAC BY FOYSAL TELECOM
FastCheck : 0x00147FE63B
Loading files ...
File : Infinity_fdl1.bin
File : Infinity_fdl2.bin
File : nvitem_w.bin
File : nvitem_wcn.bin
File : prodnv_b128k_p2k.img
File : u-boot-spl-16k.bin
File : sc7715_modem.bin
File : DSP_DM_Gx.bin
File : CP2._CP2_WCN_14C_W15.18_Release.bin
File : logo_480x800.bin
File : boot.img
File : system_b128k_p2k.img
File : cache_b128k_p2k.img
File : recovery.img
File : userdata_b128k_p2k.img
File : u-boot.bin
File : SC77xx.xml
Load Ok!
Operation : Flash [ v1.27 ]
======= Flash
Files set for flashing :
[ MCU ] : E58_HW2_V9 4.4.2 SPD LETEST VERSION PAC .pac
CRVersion : BP_R1.0.0
PacCPUinfo : SC77xx
PacVersion : E58_HW2_V9 4.4.2 SPD LETEST VERSION PAC BY FOYSAL TELECOM
File : Infinity_fdl1.bin
File : Infinity_fdl2.bin
File : nvitem_w.bin
File : nvitem_wcn.bin
File : prodnv_b128k_p2k.img
File : u-boot-spl-16k.bin
File : sc7715_modem.bin
File : DSP_DM_Gx.bin
File : CP2._CP2_WCN_14C_W15.18_Release.bin
File : logo_480x800.bin
File : boot.img
File : system_b128k_p2k.img
File : cache_b128k_p2k.img
File : recovery.img
File : userdata_b128k_p2k.img
File : u-boot.bin
1. Remove battery. Insert battery back
2. Press and hold 'VolumeUp' and 'VolumeDown' keys
-> Alternative : just ONE 'VolumeUp' or 'VolumeDown' key
3. Insert cable
==== Wait for phone...
Phone found! [ 12 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
PickUp loaders from pac
FDL Ready!
Boot Ver : Spreadtrum Boot Block version 1.1
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!
FlashMode Set : Ok!
[FL] : Enabled NVM update. Will program all NVM images found in FW !
PMTManager : Load 0x16 records
PMTManager : PMT Update Ok!
Flashing now
[FlashProc] : NVM Update
Current ID : NV_W
Current Part : wfixnv1
[FlashProc] : Ok!
[FlashProc] : NVM Update
Current ID : NV_WCN
Current Part : wcnfixnv1
[FlashProc] : Ok!
[FlashProc] : CODE
Current ID : PRODNV
Current File : prodnv_b128k_p2k.img
Flashing now ...
[FlashProc] : Ok!
[FlashProc] : ERASE
Current ID : FLASH
Current Part : wruntimenv1
[FlashProc] : Ok!
[FlashProc] : ERASE
Current ID : FLASH_WCN
Current Part : wcnruntimenv1
[FlashProc] : Ok!
[FlashProc] : ERASE
Current ID : ERASEMISC
Current Part : misc
[FlashProc] : Ok!
[FlashProc] : BOOTCODE
Current ID : SPLLOADER
Current File : u-boot-spl-16k.bin
Flashing now ...
[FlashProc] : Ok!
[FlashProc] : CODE
Current ID : MODEM_W
Current File : sc7715_modem.bin
Flashing now ...
[FlashProc] : Ok!
[FlashProc] : CODE
Current ID : DSP_W
Current File : DSP_DM_Gx.bin
Flashing now ...
[FlashProc] : Ok!
[FlashProc] : CODE
Current ID : MODEM_WCN
Current File : CP2._CP2_WCN_14C_W15.18_Release.bin
Flashing now ...
[FlashProc] : Ok!
[FlashProc] : CODE
Current ID : BOOTLOGO
Current File : logo_480x800.bin
Flashing now ...
[FlashProc] : Ok!
[FlashProc] : CODE
Current ID : BOOT
Current File : boot.img
Flashing now ...
[FlashProc] : Ok!
[FlashProc] : IMAGE
Current ID : SYSTEM
Current File : system_b128k_p2k.img
Flashing now ...
[FlashProc] : Ok!
[FlashProc] : IMAGE
Current ID : CACHE
Current File : cache_b128k_p2k.img
Flashing now ...
[FlashProc] : Ok!
[FlashProc] : CODE
Current ID : RECOVERY
Current File : recovery.img
Flashing now ...
[FlashProc] : Ok!
[FlashProc] : IMAGE
Current ID : USERDATA
Current File : userdata_b128k_p2k.img
Flashing now ...
[FlashProc] : Ok!
[FlashProc] : BOOTCODE
Current ID : UBOOTLOADER
Current File : u-boot.bin
Flashing now ...
[FlashProc] : Ok!
Elapsed: 00:01:27
Reconnect Power/Cable!