xiaomi redmi note 9 lock remove

Administrators

Administrators

Administrators
Staff member
Administrators
Joined
Nov 13, 2016
Messages
2,956
Reaction score
1,510
Points
114
Age
38
Location
dhaka
Chinese Miracle II - MT2 Service Tool v2.54





Init log engine... Ok
Build directories tree... Ok
Backup files: C:\InfinityBox\CM2MT2\backup\
Backup files: 2 dirs: 0
Verify device database...
BuiltIn: 28 Custom: 0
Build device list... Ok
Scan 11 DA profiles... Ok
libusb: v1.2.6.0
Init environment... Ok
Load IDBase v915508 Ok
boot-pack is not installed or outdated

Check for updates [CM2MT2]...
Installed v2.54
Infinity #CM2MT2 v2.80
MANY NEW MODELS SUPPORTED
MANY NEW DA FILES AVAILABLE
MANY NEW FUNCTIONS RELEASED

  • FRP and wipe via META mode for latest (2024/2025) infinix/tecno/itel devices
  • USB debugging, ADB enable for latest (2024/2025) infinix/tecno/itel devices
  • "Prototype demo phone" reset for latest (2024/2025) infinix/tecno/itel devices
  • [MemTool] updated with "Delete zeroes files" option
  • auth process for number of SoC in BROM mode revised
  • hardware compatibility checker in [Service/Aux] section
  • autobackup read/write revised

Required firmware v0165

Telegram Channel: @InfinityBox
Telegram Chat: @InfinityBoxTalks
Sales: Infinity-Box - How to buy
Account: Infinity-Box - Account

Update configuration...
Wrong Username or Password
Be sure you have set valid Username and Password in [Settings|Account]

Operation: Identify [ v2.54 ]
Platform: MTK SmartPhone - MT65/67/68/69/81/83/87 | Helio G/P/X
Mode: FLASH
Port: Both [ B + P ]; High-Speed: On
Force BROM: Off; Local SLA: Off; Auto-EMI: On; FireFly-Over-DA: On
Wait...

  • Power device Off [remember Test-Point]
  • Connect cable [remember Vol+ | Vol-]
Waiting for device...

PTFN: MediaTek USB Port (COM46)
MODE [0]: BOOTROM; PORT: 46
Waiting for BOOT ACK...
BROM: Init... Ok
CHIP: MT6768 SBID: 0x8A00 HWVR: 0xCA00 SWVR: 0x0000 EVOL: 0x0000 HWC: 0x0707
CODE: Talbot
TYPE: MODERN [RAPHAEL]
MEID: 7BBA7559E5166E3354B9C3854F5B9F34
BROM: Sec Level: 0x000000E7 Mode: SBC+SLA+SDA+EXT
VER: 0x05 BL: 0xFE [BOOTROM]
SOCID: E21E5DC6561B64BC66CAEEA29B27AE1D17B83BAC110E720B9325BEA626D33B8D
SLA: Local Auth [Forced mode]
Start Auth... Ok
Continue Auth... Ok
FF: Looking for EMI Found
SLA: Start 0x15
Auth Passed; SEC: 0x000000E0
EMI loaded by MEID: 7BBA7559E5166E3354B9C3854F5B9F34
AGENT: AUTO: 0_base: base_v2316
[07fb00a6] C:\InfinityBox\CM2MT2\boot\0_base\base_v2316\MTK_AllInOne_DA.1d5fdec4.bin
Looking for suitable bootchain in DA...
Found: MT6768; DA: MTK_DOWNLOAD_AGENT
BROM: Sending 1st DA...
DA sent
Jump to DA... Ok
Sync... Ok
DA: Agent Started
DA: SYNC
MODE: BROM
EXT_RAM NOT initialized
EMMC
CID: 13014E47314A3953391002FDEA3A47D5 crc Ok
Vendor: Micron OEM: 334 ID: 47314A395339 [G1J9S9] PRV: 0x10
Serial: 50195002 0x02FDEA3A
MM/YY: 4/2020

EMI: FireFly preloader_merlin.bin with 10 memory type(s)
1. eMMC DDR3 ID: 90014A68423861503E Hynix hB8aP> RAM: 3.00 Gb
2. eMMC LP_DDR4X ID: 150100335636434D42 Samsung 3V6CMB RAM: 6.00 Gb
3. eMMC LP_DDR4X ID: 150100334836434142 Samsung 3H6CAB RAM: 6.00 Gb
4. eMMC LP_DDR4X ID: 13014E53304A394B38 Micron S0J9K8 RAM: 4.00 Gb
5. eMMC LP_DDR4X ID: 150100444836444142 Samsung DH6DAB RAM: 4.00 Gb
6. eMMC LP_DDR4X ID: 150100445036444142 Samsung DP6DAB RAM: 4.00 Gb
7. eMMC LP_DDR4X ID: 13014E47314A395339 Micron G1J9S9 RAM: 4.00 Gb
8. eMMC LP_DDR4X ID: 13014E53304A394A38 Micron S0J9J8 RAM: 3.00 Gb
9. eMMC LP_DDR4X ID: 150100445636444142 Samsung DV6DAB RAM: 4.00 Gb
10. eMMC LP_DDR4X ID: 90014A684445615033 Hynix hDEaP3 RAM: 4.00 Gb
Push EMI... EXT_RAM CFG Passed
DA: Boot to 2nd DA...
2nd stage confirmed
DA: SYNC Ok

Load HW info...
RAM: SRAM: 0x00070000 [ 448.00 Kb ]
RAM: DRAM: 0x100000000 [ 4.00 Gb ]

EMMC
CID: 13014E47314A3953391002FDEA3A47D5 crc Ok
Vendor: Micron OEM: 334 ID: 47314A395339 [G1J9S9] PRV: 0x10
Serial: 50195002 0x02FDEA3A
MM/YY: 4/2020
BOOT1: 0x00400000 [ 4.00 Mb ]
BOOT2: 0x00400000 [ 4.00 Mb ]
RPMB: 0x01000000 [ 16.00 Mb ]
USER: 0x1D1F000000 [ 116.48 Gb ]

CHIP: MT6768 SBID: 0x8A00 HWVR: 0xCA00 SWVR: 0x0001 EVOL: 0x0000 HWC: 0x0707
CODE: Talbot
TYPE: MODERN [RAPHAEL]
RNID: 9555F8206333FBA4D2FE3D47230FBC9F
MEID: 7BBA7559E5166E3354B9C3854F5B9F34

USB: HIGH-SPEED
Boot done MODERN [RAPHAEL]
Analyze PMT... Ok
PMT: PGPT [0x64] Records: 47
Select info source... [recovery] Ok
SW: Redmi/merlin/merlin:11/RP1A.200720.011/V12.5.4.0.RJOMIXM:user/release-keys
Product Brand: Redmi
Product Device: merlin
Product Model: M2003J15SC
Product Name: merlin
Market Name: Redmi Note 9
Patch Level: RP1A.200720.011
Display ID: RP1A.200720.011
SW Version: V12.5.4.0.RJOMIXM
Ver. CodeName: REL
Ver. Release: 11
Sec. Patch: 2022-03-01
Build Time: 3/24/2022 2:45:03 PM
CPU: arm64-v8a,armeabi-v7a,armeabi
CPU: armeabi-v7a,armeabi
CPU: arm64-v8a
Product Info: merlin
SW: merlin-user 11 RP1A.200720.011 V12.5.4.0.RJOMIXM release-keys
Product Manfct: Xiaomi
Product Board: merlin
Board Platform: mt6768
Device ID: xiaomi-m2003j15sc-merlin-redmi-note-9
Strategy: [xiaomi]
Firmware ID: MT6768_Xiaomi_M2003J15SC_OSv11_V12.5.4.0.RJOMIXM_RP1A.200720.011_merlin_Redmi
Verify firmware [MT6768_Xiaomi_M2003J15SC_OSv11_V12.5.4.0.RJOMIXM_RP1A.200720.011_merlin_Redmi]...
Exist (1)

Analyze userdata...
userData: fileSystem [ext4] with FBE [file based encryption]

Analyze modem...
HUAQIN_XM_S0MP1_K6769V1_64_MDBIN_PCB01_MT6768_S00.MOLY_LR12A_R3_MP_V98_1_P22
Analyze nvram...
NVRAM: damaged
EMMC
CID: 13014E47314A3953391002FDEA3A47D5 crc Ok
Vendor: Micron OEM: 334 ID: 47314A395339 [G1J9S9] PRV: 0x10
Serial: 50195002 0x02FDEA3A
MM/YY: 4/2020
BOOT1: 0x00400000 [ 4.00 Mb ]
BOOT2: 0x00400000 [ 4.00 Mb ]
RPMB: 0x01000000 [ 16.00 Mb ]
USER: 0x1D1F000000 [ 116.48 Gb ]
Verify config values... Ok
Backup to C:\InfinityBox\CM2MT2\backup\MT6768__7BBA7559E5166E3354B9C3854F5B9F34\
Items to check: 22
Read [22] NVRAM
ZERO CONTENT file [64.00 Mb] deleted: C:\InfinityBox\CM2MT2\backup\MT6768__7BBA7559E5166E3354B9C3854F5B9F34\nvram.bin
Read [13] NVDATA
Read [20] PROINFO
Read [32] LK
Read [12] NVCFG
Read [16] PROTECT1
Read [1] PGPT
Read [14] PERSIST
Read [0] PRELOADER
Done 8 files
Compress: C:\InfinityBox\CM2MT2\backup\MT6768__7BBA7559E5166E3354B9C3854F5B9F34\
Cleanup...
Ok
Verify C:\InfinityBox\CM2MT2\backup\MT6768__7BBA7559E5166E3354B9C3854F5B9F34.7z
Enough [xiaomi-m2003j15sc-merlin-redmi-note-9]

STORAGE Life Status: eMMC : OK
STORAGE OTP Status: UNLOCKED
STORAGE RPMB Status: eMMC : RPMB KEY PROGRAMMED [UNUSABLE]

Analyze preloader...
EMI: MT6752 preloader_merlin.bin with 10 memory type(s)
1. eMMC DDR3 ID: 90014A68423861503E Hynix hB8aP> RAM: 3.00 Gb
2. eMMC LP_DDR4X ID: 150100335636434D42 Samsung 3V6CMB RAM: 6.00 Gb
3. eMMC LP_DDR4X ID: 150100334836434142 Samsung 3H6CAB RAM: 6.00 Gb
4. eMMC LP_DDR4X ID: 13014E53304A394B38 Micron S0J9K8 RAM: 4.00 Gb
5. eMMC LP_DDR4X ID: 150100444836444142 Samsung DH6DAB RAM: 4.00 Gb
6. eMMC LP_DDR4X ID: 150100445036444142 Samsung DP6DAB RAM: 4.00 Gb
7. eMMC LP_DDR4X ID: 13014E47314A395339 Micron G1J9S9 RAM: 4.00 Gb
8. eMMC LP_DDR4X ID: 13014E53304A394A38 Micron S0J9J8 RAM: 3.00 Gb
9. eMMC LP_DDR4X ID: 150100445636444142 Samsung DV6DAB RAM: 4.00 Gb
10. eMMC LP_DDR4X ID: 90014A684445615033 Hynix hDEaP3 RAM: 4.00 Gb
Preloader saved: C:\InfinityBox\CM2MT2\backup\preloader\preloader_merlin.bin
Verify C:\InfinityBox\CM2MT2\backup\preloader\preloader_merlin.bin [39de66c0]...
Exist

Probe FRP... Most probably Off

Probe Mi Account...
status: off
Reset port...
Trying to reboot...
Done: 52 sec
Reconnect Power/Cable now
Load: F:\Xiaomi\redmi note 9 - 10x same\merlin_global_images_V12.5.3.0.RJOMIXM_20220111.0000.00_11.0_global_6a8ef76c51\merlin_global_images_V12.5.3.0.RJOMIXM_20220111.0000.00_11.0_global\images\MT6768_Android_scatter.txt
SW: Redmi/merlin/merlin:11/RP1A.200720.011/V12.5.3.0.RJOMIXM:user/release-keys
Product Brand: Redmi
Product Device: merlin
Product Model: M2003J15SC
Product Name: merlin
Market Name: Redmi Note 9
Patch Level: RP1A.200720.011
Display ID: RP1A.200720.011
SW Version: V12.5.3.0.RJOMIXM
Ver. CodeName: REL
Ver. Release: 11
Sec. Patch: 2022-01-01
Build Time: 1/11/2022 3:11:32 AM
CPU: arm64-v8a,armeabi-v7a,armeabi
CPU: armeabi-v7a,armeabi
CPU: arm64-v8a
Product Info: merlin
SW: merlin-user 11 RP1A.200720.011 V12.5.3.0.RJOMIXM release-keys
Product Manfct: Xiaomi
Product Board: merlin
Board Platform: mt6768
Firmware ID: MT6768_Xiaomi_M2003J15SC_OSv11_V12.5.3.0.RJOMIXM_RP1A.200720.011_merlin_Redmi
Verify firmware [MT6768_Xiaomi_M2003J15SC_OSv11_V12.5.3.0.RJOMIXM_RP1A.200720.011_merlin_Redmi]...
Firmware is unknown
Please upload Flash Files Database - iosFileUploader - Infinity Box Dongle [CM2] [BEST] Support
Upload file to server? No

Preloader [HW DEV]:
EMI: MT6752 preloader_merlin.bin with 10 memory type(s)
1. eMMC DDR3 ID: 90014A68423861503E Hynix hB8aP> RAM: 3.00 Gb
2. eMMC LP_DDR4X ID: 150100335636434D42 Samsung 3V6CMB RAM: 6.00 Gb
3. eMMC LP_DDR4X ID: 150100334836434142 Samsung 3H6CAB RAM: 6.00 Gb
4. eMMC LP_DDR4X ID: 13014E53304A394B38 Micron S0J9K8 RAM: 4.00 Gb
5. eMMC LP_DDR4X ID: 150100444836444142 Samsung DH6DAB RAM: 4.00 Gb
6. eMMC LP_DDR4X ID: 150100445036444142 Samsung DP6DAB RAM: 4.00 Gb
7. eMMC LP_DDR4X ID: 13014E47314A395339 Micron G1J9S9 RAM: 4.00 Gb
8. eMMC LP_DDR4X ID: 13014E53304A394A38 Micron S0J9J8 RAM: 3.00 Gb
9. eMMC LP_DDR4X ID: 150100445636444142 Samsung DV6DAB RAM: 4.00 Gb
10. eMMC LP_DDR4X ID: 90014A684445615033 Hynix hDEaP3 RAM: 4.00 Gb


Operation: Write FW [ v2.54 ]
Platform: MTK SmartPhone - MT65/67/68/69/81/83/87 | Helio G/P/X
Wait...
[+] Re-Partition
[-] Checksum Verify
[+] Pre-Erase
[+] Check compatibility
[+] Backup
[-] FLASH ERASE

F:\Xiaomi\redmi note 9 - 10x same\merlin_global_images_V12.5.3.0.RJOMIXM_20220111.0000.00_11.0_global_6a8ef76c51\merlin_global_images_V12.5.3.0.RJOMIXM_20220111.0000.00_11.0_global\images\
preloader_merlin.bin [ 274.17 Kb ] f66e63fa
recovery.img [ 64.00 Mb ]
vbmeta.img [ 4.00 Kb ] 931a6ec4
vbmeta_system.img [ 4.00 Kb ] b18150fa
vbmeta_vendor.img [ 4.00 Kb ] 6d4bd286
logo.bin [ 1.06 Mb ] 335fcd75
md1img.img [ 55.67 Mb ]
spmfw.img [ 37.09 Kb ] 14aef4e7
scp.img [ 679.88 Kb ] d03d0826
scp.img [ 679.88 Kb ] d03d0826
sspm.img [ 493.77 Kb ] 58d6860d
sspm.img [ 493.77 Kb ] 58d6860d
lk.img [ 1.24 Mb ] a565a287
lk.img [ 1.24 Mb ] a565a287
boot.img [ 64.00 Mb ]
dtbo.img [ 52.95 Kb ] 2e51be37
tee.img [ 2.21 Mb ] 451f4d5d
tee.img [ 2.21 Mb ] 451f4d5d
exaid.img [ 200.00 Mb ]
cust.img [ 463.90 Mb ]
super.img [ 4.73 Gb ]
cache.img [ 176.19 Kb ] 71343245
userdata.img [ 1.84 Gb ]
Files: 23; Total size: 0x1DA7898C8 [ 7.41 Gb ]

SW: Redmi/merlin/merlin:11/RP1A.200720.011/V12.5.3.0.RJOMIXM:user/release-keys
Product Brand: Redmi
Product Device: merlin
Product Model: M2003J15SC
Product Name: merlin
Market Name: Redmi Note 9
Patch Level: RP1A.200720.011
Display ID: RP1A.200720.011
SW Version: V12.5.3.0.RJOMIXM
Ver. CodeName: REL
Ver. Release: 11
Sec. Patch: 2022-01-01
Build Time: 1/11/2022 3:11:32 AM
CPU: arm64-v8a,armeabi-v7a,armeabi
CPU: armeabi-v7a,armeabi
CPU: arm64-v8a
Product Info: merlin
SW: merlin-user 11 RP1A.200720.011 V12.5.3.0.RJOMIXM release-keys
Product Manfct: Xiaomi
Product Board: merlin
Board Platform: mt6768
Firmware ID: MT6768_Xiaomi_M2003J15SC_OSv11_V12.5.3.0.RJOMIXM_RP1A.200720.011_merlin_Redmi
  • Power device Off [remember Test-Point]
  • Connect cable [remember Vol+ | Vol-]
Waiting for device...

PTFN: MediaTek USB Port (COM46)
MODE [0]: BOOTROM; PORT: 46
Waiting for BOOT ACK...
BROM: Init... Ok
CHIP: MT6768 SBID: 0x8A00 HWVR: 0xCA00 SWVR: 0x0000 EVOL: 0x0000 HWC: 0x0707
CODE: Talbot
TYPE: MODERN [RAPHAEL]
MEID: 7BBA7559E5166E3354B9C3854F5B9F34
BROM: Sec Level: 0x000000E7 Mode: SBC+SLA+SDA+EXT
VER: 0x05 BL: 0xFE [BOOTROM]
SOCID: E21E5DC6561B64BC66CAEEA29B27AE1D17B83BAC110E720B9325BEA626D33B8D
SLA: Local Auth [Forced mode]
Start Auth... Ok
Continue Auth... Ok
SLA: Start 0x15
Auth Passed; SEC: 0x000000E0
EMI loaded by MEID: 7BBA7559E5166E3354B9C3854F5B9F34
AGENT: AUTO: 0_base: base_v2316
[07fb00a6] C:\InfinityBox\CM2MT2\boot\0_base\base_v2316\MTK_AllInOne_DA.1d5fdec4.bin
[f66e63fa] F:\Xiaomi\redmi note 9 - 10x same\merlin_global_images_V12.5.3.0.RJOMIXM_20220111.0000.00_11.0_global_6a8ef76c51\merlin_global_images_V12.5.3.0.RJOMIXM_20220111.0000.00_11.0_global\images\preloader_merlin.bin
Looking for suitable bootchain in DA...
Found: MT6768; DA: MTK_DOWNLOAD_AGENT
BROM: Sending 1st DA...
DA sent
Jump to DA... Ok
Sync... Ok
DA: Agent Started
DA: SYNC
MODE: BROM
EXT_RAM NOT initialized
EMMC
CID: 13014E47314A3953391002FDEA3A47D5 crc Ok
Vendor: Micron OEM: 334 ID: 47314A395339 [G1J9S9] PRV: 0x10
Serial: 50195002 0x02FDEA3A
MM/YY: 4/2020

EMI: Init via preloader_merlin.bin
EMI: MT6752 preloader_merlin.bin with 10 memory type(s)
1. eMMC DDR3 ID: 90014A68423861503E Hynix hB8aP> RAM: 3.00 Gb
2. eMMC LP_DDR4X ID: 150100335636434D42 Samsung 3V6CMB RAM: 6.00 Gb
3. eMMC LP_DDR4X ID: 150100334836434142 Samsung 3H6CAB RAM: 6.00 Gb
4. eMMC LP_DDR4X ID: 13014E53304A394B38 Micron S0J9K8 RAM: 4.00 Gb
5. eMMC LP_DDR4X ID: 150100444836444142 Samsung DH6DAB RAM: 4.00 Gb
6. eMMC LP_DDR4X ID: 150100445036444142 Samsung DP6DAB RAM: 4.00 Gb
7. eMMC LP_DDR4X ID: 13014E47314A395339 Micron G1J9S9 RAM: 4.00 Gb
8. eMMC LP_DDR4X ID: 13014E53304A394A38 Micron S0J9J8 RAM: 3.00 Gb
9. eMMC LP_DDR4X ID: 150100445636444142 Samsung DV6DAB RAM: 4.00 Gb
10. eMMC LP_DDR4X ID: 90014A684445615033 Hynix hDEaP3 RAM: 4.00 Gb
Push EMI... Setup EMI parameters fail [ABORT]
Fail to init protocol
  • Select proper External Preloader [EMI] file
  • Try to set Platform -> FireFly SmartPhone - MT6580/67:35|39|52|53|61|65|68|71
  • Check hardware, it may be faulty RAM
Reconnect Power/Cable now

Operation: Reset Settings/Format FS [ v2.54 ]
Platform: MTK SmartPhone - MT65/67/68/69/81/83/87 | Helio G/P/X
[+] Wipe
[+] Userdata
[+] FRP
[+] Smart
WARNING: Reset may delete ALL USER DATA!
Wait...
  • Power device Off [remember Test-Point]
  • Connect cable [remember Vol+ | Vol-]
Waiting for device...

PTFN: MediaTek USB Port (COM46)
MODE [0]: BOOTROM; PORT: 46
Waiting for BOOT ACK...
BROM: Init... Ok
CHIP: MT6768 SBID: 0x8A00 HWVR: 0xCA00 SWVR: 0x0000 EVOL: 0x0000 HWC: 0x0707
CODE: Talbot
TYPE: MODERN [RAPHAEL]
MEID: 7BBA7559E5166E3354B9C3854F5B9F34
BROM: Sec Level: 0x000000E7 Mode: SBC+SLA+SDA+EXT
VER: 0x05 BL: 0xFE [BOOTROM]
SOCID: E21E5DC6561B64BC66CAEEA29B27AE1D17B83BAC110E720B9325BEA626D33B8D
SLA: Local Auth [Forced mode]
Start Auth... Ok
Continue Auth... Ok
EMI known
SLA: Start 0x15
Auth Passed; SEC: 0x000000E0
EMI loaded by MEID: 7BBA7559E5166E3354B9C3854F5B9F34
AGENT: AUTO: 0_base: base_v2316
[07fb00a6] C:\InfinityBox\CM2MT2\boot\0_base\base_v2316\MTK_AllInOne_DA.1d5fdec4.bin
Looking for suitable bootchain in DA...
Found: MT6768; DA: MTK_DOWNLOAD_AGENT
BROM: Sending 1st DA...
DA sent
Jump to DA... Ok
Sync... Ok
DA: Agent Started
DA: SYNC
MODE: BROM
EXT_RAM NOT initialized
EMMC
CID: 13014E47314A3953391002FDEA3A47D5 crc Ok
Vendor: Micron OEM: 334 ID: 47314A395339 [G1J9S9] PRV: 0x10
Serial: 50195002 0x02FDEA3A
MM/YY: 4/2020

EMI: FireFly preloader_merlin.bin with 10 memory type(s)
1. eMMC DDR3 ID: 90014A68423861503E Hynix hB8aP> RAM: 3.00 Gb
2. eMMC LP_DDR4X ID: 150100335636434D42 Samsung 3V6CMB RAM: 6.00 Gb
3. eMMC LP_DDR4X ID: 150100334836434142 Samsung 3H6CAB RAM: 6.00 Gb
4. eMMC LP_DDR4X ID: 13014E53304A394B38 Micron S0J9K8 RAM: 4.00 Gb
5. eMMC LP_DDR4X ID: 150100444836444142 Samsung DH6DAB RAM: 4.00 Gb
6. eMMC LP_DDR4X ID: 150100445036444142 Samsung DP6DAB RAM: 4.00 Gb
7. eMMC LP_DDR4X ID: 13014E47314A395339 Micron G1J9S9 RAM: 4.00 Gb
8. eMMC LP_DDR4X ID: 13014E53304A394A38 Micron S0J9J8 RAM: 3.00 Gb
9. eMMC LP_DDR4X ID: 150100445636444142 Samsung DV6DAB RAM: 4.00 Gb
10. eMMC LP_DDR4X ID: 90014A684445615033 Hynix hDEaP3 RAM: 4.00 Gb
Push EMI... EXT_RAM CFG Passed
DA: Boot to 2nd DA...
2nd stage confirmed
DA: SYNC Ok

Load HW info...
RAM: SRAM: 0x00070000 [ 448.00 Kb ]
RAM: DRAM: 0x100000000 [ 4.00 Gb ]

EMMC
CID: 13014E47314A3953391002FDEA3A47D5 crc Ok
Vendor: Micron OEM: 334 ID: 47314A395339 [G1J9S9] PRV: 0x10
Serial: 50195002 0x02FDEA3A
MM/YY: 4/2020
BOOT1: 0x00400000 [ 4.00 Mb ]
BOOT2: 0x00400000 [ 4.00 Mb ]
RPMB: 0x01000000 [ 16.00 Mb ]
USER: 0x1D1F000000 [ 116.48 Gb ]

CHIP: MT6768 SBID: 0x8A00 HWVR: 0xCA00 SWVR: 0x0001 EVOL: 0x0000 HWC: 0x0707
CODE: Talbot
TYPE: MODERN [RAPHAEL]
RNID: 9555F8206333FBA4D2FE3D47230FBC9F
MEID: 7BBA7559E5166E3354B9C3854F5B9F34

USB: HIGH-SPEED
Boot done MODERN [RAPHAEL]
Analyze PMT... Ok
PMT: PGPT [0x64] Records: 47
Select info source... [recovery] Ok
SW: Redmi/merlin/merlin:11/RP1A.200720.011/V12.5.4.0.RJOMIXM:user/release-keys
Product Brand: Redmi
Product Device: merlin
Product Model: M2003J15SC
Product Name: merlin
Market Name: Redmi Note 9
Patch Level: RP1A.200720.011
Display ID: RP1A.200720.011
SW Version: V12.5.4.0.RJOMIXM
Ver. CodeName: REL
Ver. Release: 11
Sec. Patch: 2022-03-01
Build Time: 3/24/2022 2:45:03 PM
CPU: arm64-v8a,armeabi-v7a,armeabi
CPU: armeabi-v7a,armeabi
CPU: arm64-v8a
Product Info: merlin
SW: merlin-user 11 RP1A.200720.011 V12.5.4.0.RJOMIXM release-keys
Product Manfct: Xiaomi
Product Board: merlin
Board Platform: mt6768
Device ID: xiaomi-m2003j15sc-merlin-redmi-note-9
Strategy: [xiaomi]
Firmware ID: MT6768_Xiaomi_M2003J15SC_OSv11_V12.5.4.0.RJOMIXM_RP1A.200720.011_merlin_Redmi
SmartInfo: Android Ver: 11 UserDataFS: 0x02 [ext4|8+] CacheFS: 0x02 [ext4|8+]

EMMC
CID: 13014E47314A3953391002FDEA3A47D5 crc Ok
Vendor: Micron OEM: 334 ID: 47314A395339 [G1J9S9] PRV: 0x10
Serial: 50195002 0x02FDEA3A
MM/YY: 4/2020
BOOT1: 0x00400000 [ 4.00 Mb ]
BOOT2: 0x00400000 [ 4.00 Mb ]
RPMB: 0x01000000 [ 16.00 Mb ]
USER: 0x1D1F000000 [ 116.48 Gb ]
Verify config values... Ok
Backup exist: C:\InfinityBox\CM2MT2\backup\MT6768__7BBA7559E5166E3354B9C3854F5B9F34

Stage: Android OS
[1] WIPE... Skip (Smart comes)
[2] WIPE... Skip (Smart comes)
[3] WIPE...
Create partition image... Ok Ok
[4] WIPE...
Create partition image... Ok Ok
[6] USERDATA... Ok
[7] USERDATA... Ok
Stage: FRP...
[1] PROTECTION... Ok Ok
Done
Stage: Smart...
Stage: Mi Account...
Probe Mi Account...
status: off
Reset Account...
Done
Reset port...
Trying to reboot...
Done: 33 sec
Reconnect Power/Cable now
 
Back
Top